top of page

The SocioEsthetician Group: A Blog for all Pharm. D. Candidate Students

Pubblico·54 Pharm. D. Candidates

Cara Flashing Andromax V3s ^NEW^

Cara Flashing Andromax V3s: A Simple and Effective Solution for Your Smartphone Problems

Do you have a Smartfren Andromax V3s smartphone that is stuck on bootloop, has a corrupted system, or has other issues? If so, you might want to try flashing your device with a new firmware. Flashing is a process of installing a new software on your device, which can fix various problems and improve its performance. In this article, we will show you how to flash Andromax V3s using QFIL, a tool that can flash Qualcomm devices easily and safely.

Cara Flashing Andromax V3s

What is Andromax V3s?

Andromax V3s is one of the smartphones from Smartfren that has an attractive specification. This smartphone is equipped with a 5-inch screen, an 8 MP rear camera, a 5 MP front camera, a 2300 mAh battery, and a Qualcomm Snapdragon 410 processor. It also supports dual SIM cards and 4G LTE network.

What is QFIL?

QFIL stands for Qualcomm Flash Image Loader. It is a tool that can flash firmware files on Qualcomm devices, such as Andromax V3s. QFIL can detect your device automatically and flash it with the appropriate firmware. You can download QFIL from here.

How to Flash Andromax V3s with QFIL?

Before you start flashing your device, you need to prepare some things first. You need:

  • A PC or laptop with Windows operating system.

  • A USB cable to connect your device to the PC.

  • A backup of your important data, such as contacts, messages, photos, etc. Flashing will erase all your data on the device.

  • A battery level of at least 50% on your device.

  • A firmware file for Andromax V3s. You can download it from here.

Once you have everything ready, you can follow these steps to flash your device:

  • Extract the firmware file that you downloaded. You will get a folder with several files inside.

  • Install QFIL on your PC and run it as administrator.

  • Turn off your device and enter EDL mode. To do this, press and hold the Volume Up and Volume Down buttons together for a few seconds. Then connect your device to the PC using the USB cable.

  • QFIL will detect your device and show its information on the screen.

  • Click on the Browse button and locate the firmware folder that you extracted. Select the file named "prog_emmc_firehose_8916.mbn".

  • Click on the Load XML button and select the file named "rawprogram0.xml". Then select the file named "patch0.xml".

  • Click on the Download button and wait for the flashing process to complete. It may take several minutes.

  • When the flashing is done, you will see a green message saying "Download Succeed" and "Finish Download".

  • Disconnect your device from the PC and turn it on. It may take some time for the first boot.

Congratulations! You have successfully flashed your Andromax V3s with QFIL. You can now enjoy your device with a new firmware.

What are the Benefits of Flashing Andromax V3s?